You can specify a custom rewind and forward interval either in number of Frames or in Seconds. To do so, point to the Play menu and click Seek Settings.

Note: This option is available in the latest version of My Screen Recorder Pro.

Make sure that you are using the latest version of WebCam Monitor. To download the latest version, visit:
https://www.deskshare.com/wcm.aspx

It seems like the e-mail is being sent. However, because your e-mail server requires authentication, it might be denying a relay to your e-mail.

To diagnose e-mail related problems, you can view the e-mail log after attempting to send a test e-mail. This option is available in Tools ] Options ] Alerts tab ] Email/SMS Notification.

If this is a relay problem then you will have to contact your ISP.

You can use DeskShare's Video Edit Magic to export your edited movies directly to a DV Camera. You can download the trial version of Video Edit Magic from:
https://www.deskshare.com/vem.aspx

You can add your screen-recordings to Video Edit Magic's Collection window and drag it to the Timeline to edit them. Then, in the File menu, click Make Movie. Make your movie in DV-AVI format. After the movie is made, on the Tools menu, select Export to DV Camera and specify the DV-AVI file to export.

When the alerts are running, The "Start Monitoring with Alerts" button under the Preview window changes to "Stop Monitoring".

You can stop recording along with all running alerts by clicking "Stop Monitoring" button. This option is available even when you alerts are triggered by Motion or Noise Detection.

This option is part of the software used to connect to the internet. Normally your ISP provides you with this software.

The Window's default dial-up connection dialog box also has a "Connect Automatically" option.

If you want to add audio and edit audio after the screen-recording is complete, you need to use Video Edit Magic (https://www.deskshare.com/vem.aspx) for editing purposes.

Video Edit Magic's flexible 9-track timeline enables you to edit video and audio along with different video/audio effects and transitions.

Yes, WebCam Monitor will automatically popup a dial up connection screen if this is your default method to connect to the internet.

You can configure the dial up screen to automatically log in so WebCam Monitor can directly send e-mails.

This may be a problem with the Windows configuration on your PC. We were able to simulate this problem on an older Windows 2000 PC. We are looking into the problem.

If you have access to another PC then you try configuring WebCam Monitor on that PC.

Thank you for your appreciation.

In streaming, the most important consideration is that the bandwidth available to computers on which you are trying to view the video should be more than the bandwidth at which WebCam Monitor streams the video. Therefore, in WebCam Monitor, select the profile with the least bit-rate for testing purpose first.

WebCam Monitor streams videos in Windows Media 9 format. If you are using an older version then you need to upgrade Windows Media Player on the remote computer.

You can also try opening the link in Windows Media Player directly using the 'mms' protocol. Older versions of Windows Media Players can automatically download the required Windows Media 9 codecs and start streaming.

WebCam Monitor does not receive e-mails by connecting to mail servers. It simply sends e-mail through a mail server. If the mail server is specified then that server is used directly. Otherwise, a mail server is resolved from the domain name (gmail.com).

Simply use any one of the 5 mail servers resolved by WebCam Monitor. The E-mail Notification alert will then pick up the mail server directly and use it to send e-mails.

First, please make sure that you have the latest version of WebCam Monitor. With version 3.5 and above, you can view E-mail log that can help you diagnose the problem.

Gmail accounts work with WebCam Monitor even when you do not configure the SMTP server. When you do not configure SMTP, WebCam Monitor will use your DNS settings to find out the mail server's address. Then it will use this address to send out e-mail. These two steps takes relatively more time than when you specify the SMTP server.

After sending a test e-mail, view the SMTP log and find a list of resolved SMTP servers. Configure the SMTP server with one of the server addresses listed in the log to speed up sending e-mails.

To date/time stamp a video you need to enable Date/Time stamp.

To do so:

1. On the Tools menu click Options.
2. Under the General tab, select the option "Add a Stamp on Video Recordings and Snaps".
3. Select the "Date and Time" or "Text" stamp.
4. Click OK.

You can also sort the snaps and video by date and time under the Recordings tab at the bottom of the main application interface.

You do need a second computer to test remote monitoring. If you are using a static IP then it should work.

For detailed information, please refer to our article on remote monitoring:
https://www.deskshare.com/Resources/articles/wcm_viewcameraremotely.aspx

We have added the ability to specify the port number in the latest version of WebCam Monitor. Please download the latest version from the URL:
https://www.deskshare.com/wcm.aspx

To use the device cycle schedule, you should let the schedule start the devices and monitoring. If you manually start monitoring by clicking the 'Start Monitor with Alerts' button below the Preview window, then the schedule will not start.

To specify the start time of the schedule:

1. Point to the Tools menu and click Options.
2. Select the Device Scheduler tab.
3. Check the "Enable Device Scheduler" option.
4. Specify the Start Time in 24 hours format.

To configure Cycle through Multiple Devices:

1. Select the 'Cycle through Multiple Devices' option.
2. Click Setup.
3. Click Add.
4. Select a device pair and click Add.
5. After adding all device pairs you want, click Close.
6. Click OK.

Now leave WebCam Monitor running. You may also stop the preview. At the time specified in Start Time, WebCam Monitor will start the first device specified in the Cycle through Multiple Devices list and start monitoring. Now you will be able to switch the cameras manually.

When scheduling multiple cameras make sure that "Cycle through Multiple Devices" option is selected under the Device Scheduler setting.

For an in-depth understanding of using multiple devices with WebCam Monitor, please refer to the following article:
https://www.deskshare.com/Resources/articles/wcm_UsingMultipleCameras_MonitorEffectively.aspx

First, make sure that you click "Schedule Devices" under Quick Settings, select "Cycle through Multiple Devices", click Setup and add both your cameras to the list.

When Alerts are running then the schedule will not switch the camera. In this case, you cannot switch the camera manually too. Configure the Alerts in such a way that they complete within the time you assign to cycle from one camera to the next.

For example, if you set the "duration" of one camera to 1 minute then set the recording duration of the Audio/Video Recording Alert to less than 1 minute. You do not have worry that you will not get 1 minute of recording. When WebCam Monitor detects motion or noise again then you will get another 1 minute of recording.

Please download and install the latest version of WebCam Monitor (3.48) from:
https://www.deskshare.com/wcm.aspx

The new version contains enhanced help messages when you try to send a test e-mail. It also gives you an option to view an e-mail log so you can quickly find the problem.

Some of the problems that you can diagnose by viewing the e-mail log are:

1. Outgoing Mail Server User Name and Password authentication.
2. Invalid or misspelled Mail Server name and IP addresses.
3. Send e-mail denied due to blocked IP addresses.
4. Blocked relay ports on mail servers.

Please make sure that you are using the latest version of WebCam Monitor. To download the latest version, visit:
https://www.deskshare.com/wcm.aspx

If you already have the latest version then make sure that you have "Periodically after every" option selected from the "Automatically Alert Me" group under "Quick Settings".